The warranty of the scooter is not lost with the installation of our boards since they do not modify the scooter.
Each footboard comes ready to install on your scooter. Just install the four mounts and the board sits secure and firm on your scooter.
The boards are made out of HDPE and are maintenance free. It is 100% water proof and the new grip layer are easy to clean.
Each board has threaded metal inserts and mounts easily with the lock-mounts and screws that comes with each footboard.
Our boards has no visible bolts on the top as they are beautifully hidden beneath the board.
Installation (2 min)
The board is easy to mount and all you need is a 4 mm (5/32″) allen/hex key.
1. Put the board on top of the ordinary footstand
2. Fasten the board from beneath with the 4 bolts and the “lock-mounts” (these locks the board in place and helps you fasten the board just tight enough).
The lock-mounts are barely visible and holds the board tight and secure.
The graphics is printed on a special vinyl with a strong protective anti-slip laminate on top, all with the best quality.
You can easily change the graphics if you want to give your scooter a new look. Then pull off the old and remove any glue residue. Then place your new graphics in place. You can design your own graphics in our design studio.
Footboard with grip layer applied
4 black lock-mounts.
Size & weight
Width: 22 cm / 8.66 ”
Thickness: 10 mm / 0.39″
Weight: 1.3 kg
Designed and manufactured by Curious Joe
© 2022 Curious Joe